JA2015: Final Conference

Posted in News Items

Joint Action 2015: Final Conference

The Joint Action 2015 organises its final conference on the 17th and the 18th of April 2018, at PROSAFE office, in Brussels. This event will be preceded by the PROSAFE General Assembly. Please find below more information regarding the timing:

  • PROSAFE General Assembly on 17 April from 11:00 to 12:30;

  • JA2015 Conference (closed session) on 17 April from 13:15 to 17:15;

  • JA2015 Conference (open session) on 18 April from 9:15 to 17:00.

The full agenda is available here.

JA2016 Personal Protective Equipment - Call for Tender

Posted in News Items

Personal Protective Equipment: Call for tender

Activity Personal Protective Equipment (PPE) is inviting laboratories to submit their tender to test climbing equipement under the EN 892:2012+A1:2016, EN 12275:2013, EN 12277:2015, EN 12492:2012, and EN 958 :2017 standard series.
Within the Joint Action 2016, which started in  September 2017 and will end in Feburary 2019, the climbing equipement is defined as: Dynamic Ropes, Connectors, Harnesses, Helmets, and Energy absorbing systems for use in klettersteig (via ferrata) climbing.

The purpose of the testing is to evaluate whether the climbing equipment concerned is safe and complies with the applicable requirements of the PPE Directive 89/686/EEC or the PPE Regulation (EU) 2016/425, as the case may be.

More detailed information is provided within the formal Call for Tender, the Appendix 1 (which you need to return to us) and the PROSAFE General Conditions for Tender. Further details regarding the task and the selection procedure can be obtained from the Activity Coordinator.

Please note that quotations must be sent in hardcopy to PROSAFE Office (Avenue des Arts/Kunstlaan 41, 2nd floor, B-1040 Brussels, Belgium) and via email no later than 17 h 00 on 5 February 2018 (CET). Quotations received after the deadline will be rejected.

climbing equipments

JA2016: Climbing Equipment

Posted in News Items

The Joint Action 2016 (JA2016) will see work commence on personal protective equipment. Climbing equipment has been chosen as the first specific product class to be addressed during this JA2016 as a result of the general priority-setting exercise for the Joint Action carried out amongst the Member States.

This work will include surveillance activities, product testing, risk assessment of the products tested and eventual action needed to be taken. Appropriate test methods for the other products will be identified as needed depending on the products sampled. The participants will carry out coordinated market surveillance in their national markets. 

The work plan comprises 6 project meetings (including a 2-day meeting with the participation of stakeholders), testing of an estimated 210 products with the results being presented at the final conference of the Joint Action. This work will of course be closely coordinated with the groups working on standards concerning PPE tools. The Joint Action will support the work with the definition and checking of the test methods, the reproducibility of the tests, etc.

The participants

The 9 Member States involved in the project are: Belgium, Croatia, Germany, Latvia, Malata, Bulgaria, Iceland, Luxembourg, Norway. PROSAFE is the leader of this product activity.

climbing equipments

JA2016: Impact drills

Posted in News Items

Work on Power Tools has begun within the framework of the Joint Action 2014 (JA2014).  Following a priority-setting exercise, the Member States decided to enforce the safety of the impact drills within the framework of the Joitn Action 2016 (JA2016).Woker  Impact drill

The work to be undertaken will include surveillance activities, product testing, risk assessment of the products tested and eventual action needed to be taken. Appropriate test methods for the other products will be identified as needed depending on the products sampled. The participants will carry out coordinated market surveillance in their national markets. The proposal comprises 6 project meetings (including a 2-day meeting with the participation of stakeholders), testing of an estimated 105 products with the results being presented at the final conference of the Joint Action.

This work will of course be closely coordinated with the groups working on standards concerning Power tools. The Joint Action will support the work with the definition and checking of the test methods, the reproducibility of the tests, etc.

The participants

The 7 Member States involved in this product activity are: Bulgaria, Germany, Lithuania, Poland, Croatia, Latvia, and Malta. PROSAFE is the leader of the this working group. 

JA2016: Household Electrical Appliances 2

Posted in News Items

Due to the importance of this particular sector, houselhold electrical appliances are adressed for the second time in a Joint Action coordinated by PROSAFE. As a result of a priority-setting exercise initiated within the framework of JA2015, the Member States decided to focus their work on hair care products.

Hair StraighteneAs a part of the Joint Action 2016 (JA2016), this work will include surveillance activities, product testing, risk assessment of the products tested and eventual action needed to be taken. Appropriate test methods for the other products will be identified as needed depending on the products sampled. In addition, for these kind of products, it is of particular importance to know how the products are judged on LVD compliance by the manufacturer. Therefore, the EC declaration of conformity and the relevant parts of the Technical File (TF) will also be verified.

The participants will carry out coordinated market surveillance in their national markets. The work plan comprises 6 project meetings (including a 2-day meeting with the participation of stakeholders), testing of an estimated 105 products with the results being presented at the final conference of the Joint Action.Hair Drier

The participants

The 15 Member States involved in this product activity are the following: Bulgaria, Cyprus, Finland, Lithuania, Poland, Romania, Croatia, Czech Republic, France, Latvia, Malata, Slovakia, Sweden. Poland is the leader of the working group.