Personal Protective Equipment: Call for tender

Activity Personal Protective Equipment (PPE) is inviting laboratories to submit their tender to test climbing equipement under the EN 892:2012+A1:2016, EN 12275:2013, EN 12277:2015, EN 12492:2012, and EN 958 :2017 standard series.
Within the Joint Action 2016, which started in  September 2017 and will end in Feburary 2019, the climbing equipement is defined as: Dynamic Ropes, Connectors, Harnesses, Helmets, and Energy absorbing systems for use in klettersteig (via ferrata) climbing.

The purpose of the testing is to evaluate whether the climbing equipment concerned is safe and complies with the applicable requirements of the PPE Directive 89/686/EEC or the PPE Regulation (EU) 2016/425, as the case may be.

More detailed information is provided within the formal Call for Tender, the Appendix 1 (which you need to return to us) and the PROSAFE General Conditions for Tender. Further details regarding the task and the selection procedure can be obtained from the Activity Coordinator.

Please note that quotations must be sent in hardcopy to PROSAFE Office (Avenue des Arts/Kunstlaan 41, 2nd floor, B-1040 Brussels, Belgium) and via email no later than 17 h 00 on 5 February 2018 (CET). Quotations received after the deadline will be rejected.

climbing equipments

 Co Funded by the EU logo okEU logo

Disclaimer: The content of this webpage represents the views of the author only and it is his/her sole responsibility; it cannot be considered to reflect the views of the European Commission and/or the Consumers, Health, Agriculture and Food Executive Agency and/or the Executive Agency for Small and Medium-sized Enterprises (EASME) or any other body of the European Union. The European Commission and the Agency do not accept any responsibility for use that may be made of the information it contains.


Copyright © 2018 PROSAFE All Rights Reserved | Avenue des Arts - Kunstlaan 41 | B-1040 Brussels | Belgium | T +32 2 808 09 96 |